[ Type ]: YBS-G1

Products ]: Corn Germ Oil

[ Introduction ]: The oil expeller is applied to pressing all oil materials.

The oil expeller is authenticated and promoted by national Agricultural Department.

Working principle:
The fine germs are fried in automatic rotating pan at 200℃ for 30min .It reaches 2-4% when finished.The husks turn yellowy and shrink.Then cool the germs till 60-80℃ and put them to spiral pressor with the screw adjusted at 170℃.It begins to squeeze oil when the machine head is at 80—90℃ and electric current is within18—24A.The crude oil stays at 70-80℃,stirred with 6% hot saline to dephosphorize and filtered in centrifugal machine.Then it is kept stirring with 16%60℃ hot saline for 10-15min and settled down for 120min.Water and Impurities are discharged from bottom valve while the germ oil left in tank is heated to 120℃ and kept agitating for 10-15min before it is pumped into filtering tank with emathlite to decolor in the proportion of 1:20.Then the roily oil is recycled when the bottom valve is opened.The clean oil is discharge to finished products tank.

The oil expeller is authenticated and promoted by national Agricultural Department.
It has achieve many patents.
Oil output is 3-5% higher than three or four grades.
Diverse pressing methods: cold& heat press. It can be selected according to different regions. The barrel is structured in 5/6/7/8 grades, which automatically crush, flake, press germs and output oil at one time.
The bevel gear reduces load and power consumption, saving 30-50% of the electricity compared with traditional oil expeller and extending life span for 8-10 years.
It is configurated with national standard motor and smart auto oil-scrap separation refiner.
The oil expeller is applied to pressing all oil materials.
 
Features:
1.High Oil Extraction Rate;
2.Reduce the squeezing cost;
3.The deep processing degree;
4.The Squeezing Method;
5.Good Oil quality;
6.Safety Performance;
7.The materials peanut, bean, rape, sunflower, flaxseed, camellia seed, and cotton seed can be processed;  
8.Operating Mold;

Technical parameter:

Production Condition

Power(National Standard Motor)

Capacity

Dimension(mm)

2 labors, factory 25㎡

15Kw 380V

8-10Ton/Day

2580×1600×2000

The oil expeller is authenticated and promoted by national Agricultural Department.
It has achieve many patents.
Oil output is 3-5% higher than three or four grades.
Diverse pressing methods: cold& heat press. It can be selected according to different regions. The barrel is structured in 5/6/7/8 grades, which automatically crush, flake, press germs and output oil at one time.
The bevel gear reduces load and power consumption, saving 30-50% of the electricity compared with traditional oil expeller and extending life span for 8-10 years.
It is configurated with national standard motor and smart auto oil-scrap separation refiner.
The oil expeller is applied to pressing all oil materials.
 

Features:
1.High Oil Extraction Rate;
2.Reduce the squeezing cost;
3.The deep processing degree;
4.The Squeezing Method;
5.Good Oil quality;
6.Safety Performance;
7.The materials peanut, bean, rape, sunflower, flaxseed, camellia seed, and cotton seed can be processed;  
8.Operating Mold;

The fine germs are fried in automatic rotating pan at 200℃ for 30min .It reaches 2-4% when finished.The husks turn yellowy and shrink.Then cool the germs till 60-80℃ and put them to spiral pressor with the screw adjusted at 170℃.It begins to squeeze oil when the machine head is at 80—90℃ and electric current is within18—24A.The crude oil stays at 70-80℃,stirred with 6% hot saline to dephosphorize and  filtered in centrifugal machine.Then it is kept stirring with 16%60℃ hot saline for 10-15min and settled down for 120min.Water and Impurities are discharged from bottom valve while the germ oil left in tank is heated to 120℃ and kept agitating for 10-15min before it is pumped into filtering tank with emathlite to decolor in the proportion of 1:20.Then the roily oil is recycled when the bottom valve is opened.The clean oil is discharge to finished products tank.

Production Condition

Power(National Standard Motor)

Capacity

Dimension(mm)

2 labors, factory 25㎡

15Kw 380V

8-10Ton/Day

2580×1600×2000

Technical Training and After-sales Service


1. Timely provide Party A with all the technical materials and drawings as the contract; compile and supplement operation manual according to the final commissioning results. 
2. Party B offers on-site training service according to progress of the project, installing, trying operation and production of the whole line as it is required on the technical materials and drawings. 
3. Party B gives training of installation, commissioning, use and maintenance to staff of Party A under their arrangement. 
4. Instruct operators and maintenance staff. 
5. Increase pre-sale, in-sale and after-sale service, implementing super pre-sale, full process and life long service through manufacturing, installation, commissioning and production. 
6. During warranty period, Party B will provide an answer or staff within 4 hours once receiving feedbacks about quality of the products. Party B will arrive at the site as soon as possible, change and maintain the spare parts for free. The service will never stop until the clients are satisfied. 
7. Beyond warranty period, Party B is on call to provide paid service for improvement of technology, maintenance of the machine or offer of the spare parts.

Case

Production site

Business cooperation

 
Name: *
Email: *
Phone:
Message: Please fill in the form and send it to us.
 
 

PRODUCT LIST

grain processing equipment
peeling machine
flour mill
flour mill auxiliary equipment
grain cleaning equipment

Company honor

在线客服系统